IDS-50xx
From AcceedWiki
(Difference between revisions)
Jan Keyling (Talk | contribs) |
Jan Keyling (Talk | contribs) |
||
| Line 7: | Line 7: | ||
== IDS-50XX-WG (WLAN models) hints == | == IDS-50XX-WG (WLAN models) hints == | ||
* If you want IDS-50XX-WG to connect to your host PC (or another IDS-50XX-WG in tunnel mode), make sure no ethernet cable is connected to IDS-50XX-WG´s LAN port. If IDS-50XX-WG is connected via LAN, it will automatically disable WLAN to avoid dual connection. So, WLAN will only work when there is no connection to a wire-based LAN available. | * If you want IDS-50XX-WG to connect to your host PC (or another IDS-50XX-WG in tunnel mode), make sure no ethernet cable is connected to IDS-50XX-WG´s LAN port. If IDS-50XX-WG is connected via LAN, it will automatically disable WLAN to avoid dual connection. So, WLAN will only work when there is no connection to a wire-based LAN available. | ||
| + | * The SSID of your WLAN should not contain a "space" - i.e., you may call it for example "IDS_WLAN", but "IDS WLAN" will not work. | ||
== IP Module In Serial Tunnel == | == IP Module In Serial Tunnel == | ||
Revision as of 13:19, 30 June 2010
Contents |
IDS-50XX
IDS-50XX are serial device servers for either serial-over-ethernet and/or serial-over-WLAN communication (IDS-50XX-WG models). Several models (IDS-50X2) feature dual LAN ports for ethernet redundancy (recovery time <10ms). Also all models share redundant dual power inputs (12-48VDC). The supplied DS-Tools setup & administration software allows complete configuration of devices, and includes Wizard function for easy step-by-step setup of all connected devices.
General hints
- When connecting the modules for the first time with the host PC, make sure both are in the same subnet. The default IP of IDS-50XX is 192.168.10.2 - so the host PC should have for example 192.168.10.1 or any other IP in the 192.168.10 subnet. Otherwise, DS-Tools might not be able to connect to the device. You may change the device´s IP address via DS-Tools later.
IDS-50XX-WG (WLAN models) hints
- If you want IDS-50XX-WG to connect to your host PC (or another IDS-50XX-WG in tunnel mode), make sure no ethernet cable is connected to IDS-50XX-WG´s LAN port. If IDS-50XX-WG is connected via LAN, it will automatically disable WLAN to avoid dual connection. So, WLAN will only work when there is no connection to a wire-based LAN available.
- The SSID of your WLAN should not contain a "space" - i.e., you may call it for example "IDS_WLAN", but "IDS WLAN" will not work.
IP Module In Serial Tunnel
- In paired mode (or tunnel mode) you will need 2 IDS-50XX
- Choose either TCP (safer, recommended) or UDP (faster) mode
- One module needs to work as "client" and the other as "server"
- DS-Tools (included) allows easy tunnel mode setup via step-by-step Wizard
- Tunnel mode works either via LAN or WLAN connection (IDS-50XX-WG models)
