IDS-50xx
From AcceedWiki
(Difference between revisions)
Jan Keyling (Talk | contribs) |
Jan Keyling (Talk | contribs) |
||
| (One intermediate revision by one user not shown) | |||
| Line 1: | Line 1: | ||
| − | IDS- | + | IDS-50xx are serial device servers for either serial-over-ethernet and/or serial-over-WLAN communication (IDS-50xx-WG models). Several models (IDS-50x2) feature dual LAN ports for ethernet redundancy (recovery time <10ms). Also all models share redundant dual power inputs (12-48VDC). The supplied DS-Tools setup & administration software allows complete configuration of devices, and includes Wizard function for easy step-by-step setup of all connected devices. |
== General hints == | == General hints == | ||
| − | * When connecting the modules for the first time with the host PC, make sure both are in the same subnet. The default IP of IDS- | + | * When connecting the modules for the first time with the host PC, make sure both are in the same subnet. The default IP of IDS-50xx is 192.168.10.2 - so the host PC should have for example 192.168.10.1 or any other IP in the 192.168.10 subnet. Otherwise, DS-Tools might not be able to connect to the device. You may change the device´s IP address via DS-Tools later. |
| − | == IDS- | + | == IDS-50xx-WG (WLAN models) hints == |
| − | * If you want IDS- | + | * If you want IDS-50xx-WG to connect to your host PC (or another IDS-50xx-WG in tunnel mode), make sure no ethernet cable is connected to IDS-50xx-WG´s LAN port. If IDS-50xx-WG is connected via LAN, it will automatically disable WLAN to avoid dual connection. So, WLAN will only work when there is no connection to a wire-based LAN available. |
* The SSID of your WLAN should not contain a "space" - i.e., you may call it for example "IDS_WLAN", but "IDS WLAN" will not work. | * The SSID of your WLAN should not contain a "space" - i.e., you may call it for example "IDS_WLAN", but "IDS WLAN" will not work. | ||
== IP Module In Serial Tunnel == | == IP Module In Serial Tunnel == | ||
| − | * In paired mode (or tunnel mode) you will need 2 IDS- | + | * In paired mode (or tunnel mode) you will need 2 IDS-50xx |
* Choose either TCP (safer, recommended) or UDP (faster) mode | * Choose either TCP (safer, recommended) or UDP (faster) mode | ||
* One module needs to work as "client" and the other as "server" | * One module needs to work as "client" and the other as "server" | ||
* DS-Tools (included) allows easy tunnel mode setup via step-by-step Wizard | * DS-Tools (included) allows easy tunnel mode setup via step-by-step Wizard | ||
| − | * Tunnel mode works either via LAN or WLAN connection (IDS- | + | * Tunnel mode works either via LAN or WLAN connection (IDS-50xx-WG models) |
| − | [[Category:Produkt|IDS- | + | [[Category:Produkt|IDS-50xx]] |
Latest revision as of 13:58, 1 July 2010
IDS-50xx are serial device servers for either serial-over-ethernet and/or serial-over-WLAN communication (IDS-50xx-WG models). Several models (IDS-50x2) feature dual LAN ports for ethernet redundancy (recovery time <10ms). Also all models share redundant dual power inputs (12-48VDC). The supplied DS-Tools setup & administration software allows complete configuration of devices, and includes Wizard function for easy step-by-step setup of all connected devices.
[edit] General hints
- When connecting the modules for the first time with the host PC, make sure both are in the same subnet. The default IP of IDS-50xx is 192.168.10.2 - so the host PC should have for example 192.168.10.1 or any other IP in the 192.168.10 subnet. Otherwise, DS-Tools might not be able to connect to the device. You may change the device´s IP address via DS-Tools later.
[edit] IDS-50xx-WG (WLAN models) hints
- If you want IDS-50xx-WG to connect to your host PC (or another IDS-50xx-WG in tunnel mode), make sure no ethernet cable is connected to IDS-50xx-WG´s LAN port. If IDS-50xx-WG is connected via LAN, it will automatically disable WLAN to avoid dual connection. So, WLAN will only work when there is no connection to a wire-based LAN available.
- The SSID of your WLAN should not contain a "space" - i.e., you may call it for example "IDS_WLAN", but "IDS WLAN" will not work.
[edit] IP Module In Serial Tunnel
- In paired mode (or tunnel mode) you will need 2 IDS-50xx
- Choose either TCP (safer, recommended) or UDP (faster) mode
- One module needs to work as "client" and the other as "server"
- DS-Tools (included) allows easy tunnel mode setup via step-by-step Wizard
- Tunnel mode works either via LAN or WLAN connection (IDS-50xx-WG models)
