GPort104
Jan Keyling (Talk | contribs) |
Jan Keyling (Talk | contribs) |
Revision as of 17:48, 17 August 2009
Contents |
GPort104
GPort104 is an easy to use Serial over Ethernet module. There is one 100/10 Ethernet port and one port DIP switch selectable to RS232, RS422 or RS485. IP101 has one serial port, IP102 2 ports and IP104 has 4 ports
IP Module In Serial Tunnel
- In paired mode (or tunnel mode) you will need 2 IP101
- Choose either TCP (safer, recommended) or UDP (faster) mode
- One module needs to work as "client" and the other as "server"
- For make safe pairing we need to use fixed IP addresses
RoHS conformity changes
The hardware for old IP101 and new IP101 is same architecture. But there are some modification in part to meet RoHS. The major different is in power adaptor. So it is no difference in firmware.
Firmware
Please keep in mind that ver1.5 and ver1.8 firmware is fully different. If customer could use ver1.5 firmware, then we don't suggest to upgrade. The upgrade procedure is very complex. Please read the PDF file in attached file carefully. There are two steps to upgrade the firmware.
- step 1===> to upgrade ver1.5 to middle version firmware.
- step 2===> to upgrade middle version to ver1.8
Please use one clean environment (just one PC and one IP101 in LAN connection) to do upgrade procedure.
