GPort104
From AcceedWiki
(Difference between revisions)
Jan Keyling (Talk | contribs) |
Jan Keyling (Talk | contribs) |
||
| Line 5: | Line 5: | ||
1. Install the Gport_ap-Software which is found on the included CD. | 1. Install the Gport_ap-Software which is found on the included CD. | ||
2. Connect the GPort104 with your LAN using GPOrt´s WAN-Port on the right side of the front panel. Switch on the device. | 2. Connect the GPort104 with your LAN using GPOrt´s WAN-Port on the right side of the front panel. Switch on the device. | ||
| − | 3. Start | + | 3. Start the software, click "Search" to determine if the GPort is connected |
[[Category:Produkt|GPort104]] | [[Category:Produkt|GPort104]] | ||
Revision as of 14:10, 18 August 2009
GPort104
GPort104 is an easy to use Serial over Ethernet module. There are 4 RS232 ports (with DB9 male connector), one 100/10 Ethernet port and one RJ 45 console port. The internal processing is done by a Linux system which runs on a 32bit 100MHz MIPS CPU with 8MB flash ROM and 16MB SDRAM
Quick Installation Guide for Virtual COM mode
1. Install the Gport_ap-Software which is found on the included CD. 2. Connect the GPort104 with your LAN using GPOrt´s WAN-Port on the right side of the front panel. Switch on the device. 3. Start the software, click "Search" to determine if the GPort is connected
