AcceedWiki - User contributions [en]

PassPortNetworks

2007-11-02T07:52:23Z

Werner:

== Firmware Update Procedure ==

Please make sure:
* The serial port mode is upgrade mode.
* DIP switch is off-off position.
* Make sure the RS232 cable is NULL modem cable. If there is no NULL modem cable, please use Virtual COM for upgrading.
== Firmware Version ==

This firmware version (31. Oct. 2007) fixes an auto direction timing problem:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_103107.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_103107.hex aport312]

== History of Firmware ==

This firmware version (13. Jul. 2007) does significantly reduce answering delay time:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_071307.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_071307.hex aport312]

PassPortNetworks

2007-11-02T07:50:41Z

Werner:

== Firmware Version ==

This firmware version (31. Oct. 2007) fixes an auto direction timing problem:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_103107.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_103107.hex aport312]

== History of Firmware ==

This firmware version (13. Jul. 2007) does significantly reduce answering delay time:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_071307.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_071307.hex aport312]

== Firmware Update Procedure ==

Please make sure:
* The serial port mode is upgrade mode.
* DIP switch is off-off position.
* Make sure the RS232 cable is NULL modem cable. If there is no NULL modem cable, please use Virtual COM for upgrading.

PassPortNetworks

2007-11-02T07:48:49Z

Werner:

== Firmware Version ==

This firmware version (31. Oct. 2007) fixes an auto direction timing problem:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_103107.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_103107.hex aport312]

This firmware version (13. Jul. 2007) does significantly reduce answering delay time:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_071307.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_071307.hex aport312]

== Firmware Update Procedure ==

Please make sure:
* The serial port mode is upgrade mode.
* DIP switch is off-off position.
* Make sure the RS232 cable is NULL modem cable. If there is no NULL modem cable, please use Virtual COM for upgrading.

AcceedWiki:Site support

2007-11-01T18:56:38Z

Werner:

Welcome !

AutoLab

2007-11-01T18:45:42Z

Werner:

autoLab ist für frei definierbare Signalverarbeitung entwickelt. Es enthält Module für die Datenerfassung, Signalanalyse, Speicherung und nicht zuletzt zur Anzeige der erhobenen Daten.

== Arbeitsprinzip ==

Zunächst sind die erfassten Daten im PC nichts anderes als Zahlenwerte. Diese repräsentieren ein Signal, z.B. den Außentemperaturverlauf über den Tag, oder auch nur eine Information wie Schalter geöffnet oder geschlossen.
Für die direkte "Übersetzung" der logischen oder physikalischen Größen können Ein-/Ausgabekarten verwendet werden. Dazu müssen Temperaturwerte mit einem Sensor erfasst und in einen korrelierenden Spannungswert übertragen werden, dann kann eine Analog-Digital-Wandler-Karte diesen Spannungswert in eine PC-darstellbare Zahl übersetzen. Oder für logische Größen kann eine Digital-Ein-/Ausgabe-Karte verwendet werden. Natürlich kann man auch Zahlenwerte über eine andere Schnittstelle, z.B. USB oder ComPort, aufnehmen.

Im Prinzip sind das jetzt Zahlenreihen mit den Messwerten, entsprechend den Werten einer Zeile oder Spalte in der Tabellenkalkulation. Diese Zahlenreihe kann zunächst als Rohdaten als simple Datei abgespeichert werden.

== Möglichkeiten ==

* Biosignale
* Ultraschallauswertung

[[Category:Produkt]]

Industrie-Computer Grundnormen

2007-11-01T18:39:04Z

Werner:

Industriecomputer entsprechen folgenden EMV Richtlinien:

EMV Fachgrundnormen:

'''EN 61000 6-1 (3)''' (Wohnbereich/Industriebereich Störaussendung)

'''EN 61000 6-2 (4)''' (Wohnbereich/Industriebereich Störfestigkeit)

Produktvorschriften für Einrichtungen der Informationstechnik:

'''EN 55022''' (Störaussendung)
Bei der Störausssendung unterscheidet man in Geräten der Klasse A und der Klasse B.
Geräte der Klasse B unterliegen keiner Verkaufsbeschränkung.
Geräte der Klasse A unterliegen keiner Verkaufsbeschränkung, jedoch muss die Betriebsanleitung folgenden Warnhinweis enthalten:
: ''Warnung: Dies ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funkstörungen verursachen; in diesem Fall kann vom Betreiber verlangt werden, angemessene Maßnahmen durchzuführen.''

'''EN 55024''' (Störfestigkeit)

Niederspannungsrichtlinie:

'''EN 61010 bzw. IEC 61010''' (Sicherheitsbestimmungen für elektrische Meß-, Steuer-, Regel- und Laborgeräte (MSR-Geräte)

'''EN60950''' (Sicherheit von Einrichtungen der Informationstechnik)

P640NU

2007-11-01T18:37:23Z

Werner:

This driver doesn't work with FC6, kernel 2.6.20+

The driver loads:

----
**********************************************
NTCARD Device Driver Ver 7.1.0
Copyright (C) 2004-2012 Rayon Company, Ltd.
All Rights Reserved

PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:0b.0
.....Device1=P640N Jp=1 box=3 port=24 IRQ=a
**********************************************
----

Then any attempt to access any of the ports (setserial, minicom etc) kills the module:

----
BUG: sleeping function called from invalid context at mm/slab.c:3033
in_atomic():0, irqs_disabled():1
[<c0472d0a>] __kmalloc+0x42/0x7d
[<c04a61e9>] proc_create+0x8e/0xdf
[<c04a63fb>] proc_mkdir_mode+0x22/0x54
[<c045419a>] register_handler_proc+0x95/0xa3
[<c0452ea0>] setup_irq+0x15f/0x1ac
[<f8aa34df>] ntc_interrupt_single+0x0/0x3a4 [rayon]
[<c0453071>] request_irq+0xb1/0xd0
[<f8aa34df>] ntc_interrupt_single+0x0/0x3a4 [rayon]
[<f8aa4118>] ntcstartup+0x16c/0x31b [rayon]
[<f8aa4cd3>] ntc_open+0x21b/0x4a5 [rayon]
[<c05309e4>] tty_ldisc_enable+0x27/0x29
[<c05308f4>] check_tty_count+0x3b/0x94
[<c0533c1a>] tty_open+0x175/0x2c4
[<c0478668>] chrdev_open+0xf7/0x12b
[<c0478571>] chrdev_open+0x0/0x12b
[<c0474d88>] __dentry_open+0xc3/0x17a
[<c0474eb9>] nameidata_to_filp+0x24/0x33
[<c0474efa>] do_filp_open+0x32/0x39
[<c0474cbb>] get_unused_fd+0xb3/0xbd
[<c0474f43>] do_sys_open+0x42/0xbe
[<c0474ff8>] sys_open+0x1c/0x1e
[<c0404f70>] syscall_call+0x7/0xb
=======================

----

The module is then frozen and you must unload and reload it.

Please make it work !

[[Category:Produkt]]

PassPortNetworks

2007-11-01T18:36:32Z

Werner:

== Firmware Version ==

This firmware version does significantly reduce answering delay time:
* 1 port module [http://www.acceed.com/download/artila/aport311_upgrade_071307.hex aport311]
* 2 port module [http://www.acceed.com/download/artila/aport312_upgrade_071307.hex aport312]

== Firmware Update Procedure ==

Please make sure:
* The serial port mode is upgrade mode.
* DIP switch is off-off position.
* Make sure the RS232 cable is NULL modem cable. If there is no NULL modem cable, please use Virtual COM for upgrading.

VideoLAB

2007-11-01T18:35:13Z

Werner:

Das VideoLab-Projekt ist vordergründig ein Netzwerk für Video-Daten. Video-Quellen können von beliebigen PC's zu anderen PC's im Netzwerk als Stream übertragen werden.

Die Netzwerklast ist auch bei HDTV-Übertragung erstaunlich gering. Auch mehrere Streams können moderne Netzwerke nicht auslasten.

Dazu gibt es Benutzer-Accounts, um Personen im Klartext und nicht nur über die IP-Adresse finden zu können. Über diese Accounts werden auch die gestuften Berechtigungen verwaltet. Ebenfalls ist eine Sende- oder Empfangsdauer-Aufzeichnung möglich.

Eine eingebaute Programmiersprache gestattet die Anpassung an indiviuelle Erfordernisse, z.B. Farb- oder Kontrastfilter im Signalpfad oder Bewegungserkennung.

Über eine offen gelegte Schnittstelle können solche selbst-programmierte Plugins eingebunden werden.

== Einsatzbereiche ==

* Video-Gegensprechen
* Türüberwachung mit Gegensprechen
* Sicherheitstechnik
* DVD-Videoplayer z.B. Hotel

== Installation ==

Download der aktuellen Version:
* [http://www.video.acceed.com/vserver8.exe Vollversion]
* [http://www.video.acceed.com/autoupdate.exe AutoUpdate]

== Tech Specs ==

Das Programm kann auf einem PC-System ab ca P4 Level arbeiten.

== Manual ==

Diese Seiten sollen die Aufgaben eines Manual erfüllen

== Bugreport ==

Für strukturiertes und effizientes Debugging ist [http://flyspray.acceed.com/ Flyspray] installiert.

[[Category:Produkt]]

P588U

2007-11-01T18:33:20Z

Werner:

P588U card is eight RS232 serial port card.

== Cabling / Connectors ==

Generally you can have R804 cable to work with this UPCI card to support eight DB9 male connector. Or you can use R801 cable to support eight DB25 male connector.

== Options ==

For people need to support RS422 or RS485 interface to replace RS232 interface. They can use P8485U card to support eight RS422/RS485 serial ports in one card. Or they can use R803 cable to connect with RS4232-8 box. Then they can have eight ground isolated RS422/RS485 interface.

For SCO Openserver UNIX user P588U card is one of the cheapest way to add extra eight TTY device connection.

== User ==

For DOS and WIN95/98/Me/2000/NT/XP/2003 user P588U card is one of the cheapest way to add extra eight COM serial port.

== Driver ==

For Linux user P588U card can support RedHat , Slackware, Suse new 2.6.x kernel system.

== Differences ==

[http://www.acceed.com/p588u P588U] is the universal PCI or 3,3V variant of [http://www.acceed.com/p588 P588]

[[Category:Produkt]]

Matrix-500

2007-11-01T18:32:37Z

Werner:

Matrix-500 is an embedded computer with 200MHz ARM9 RISC CPU manufactured by [http:///www.Artila.com Artila]. There are 4 high speed RS232 ports (1 port RS232/422/485 selectable), 2 USB port, 16 general purpose [http://en.wikipedia.org/wiki/Input/output digital IO port] (inside case connector). Matrix-500 uses [http://www.arm.linux.org.uk/ ARM-Linux], so it behaves like a standard Linux machine regarding the handling of USB, serial and Ethernet ports. Users can upload own programs in order to customize Matrix-500 for their special purpose. SDK for both Linux and Windows host PCs is included.

== Console Port ==

Matrix 500's console is disable as factory default setting. To enable the
console port, please find the information attached. Because the console
port (ttyS0) share the same pins with serial port P3 (ttyS3), user need to
prepare a special cable to connect ttyS0 via the RJ45 connector of Port 3.
To trigger the console port function, user need to press "@@@@" continuously
right after power up and after the screen show "Starting Matrix 500......."
Remember to disable the console port before leaving the Loader program.

Regarding the special cable, it is different from the RJ45 to DB9 cable used on Port 1 to Port 4 ([http://www.acceed.info/manuals/artila/Matrix-500%20Enable%20Serial%20Console.pdf Details])

== Protocols ==

* SSL ([http://en.wikipedia.org/wiki/Transport_Layer_Security Secure Socket Layer])
* SSH ([http://en.wikipedia.org/wiki/Secure_Shell Secure Shell])
* TelNet ([http://en.wikipedia.org/wiki/TELNET TelNet]) (TELetype NETwork)
* and more
== USB Modem ==

USB Modem Support

USB modems (for plain old telephone service, ISDN or cable) are supposed to conform to the Communication Device Class (CDC) specification <http://www.usb.org/developers/data/devclass/usbcdc11.pdf>, and usually to the Abstract Control Model (ACM) sub-class. If your modem doesn't comply with the specification, it will not work with this driver.

You need to select the *USB Modem (CDC ACM) support* kernel option. If you build as modules, you need to install the acm.o option.

You need to set up the device node entries for the various modems. You can use up to 32 modems with this driver. Use the following commands to set up the first four:

*mknod /dev/usb/ttyACM0 c 166 0
*mknod /dev/usb/ttyACM1 c 166 1
*mknod /dev/usb/ttyACM2 c 166 2
*mknod /dev/usb/ttyACM3 c 166 3

You should now be able to use a terminal emulator program to attach to this device and connect to your modem or other terminal device.

== WLAN ==

Please use "dmesg" to check if the kernel detect the wireless. If kernel detect the usb wireless lan. You can skip the "modprob command" just type
* ifconfig wlan0 up
* iwconfig wlan0 essid XXXX key YYYY mode MMMM

(where XXXX is the network name YYYY is the hardware key MMMM is managed for infrastructure mode and ad-hoc for ad-hoc mode)

To configure IP address
* dhcpcd wlan0 & ("&" means run in the background)
or
* ifconfig wlan0 xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx

New driver for Ralink RT2571 is available in Artila CD\Matrix 500\Wifi\rt73.ko

copy rt73.ko to Matrix 500\disk
cd \disk
insmod rt73.ko

to insert the driver module to Matrix 500

Artila has drivers for WLAN sticks with Ralink 2500/2501 chipsets. Ralink provides a list of these products made by different companies at http://ralink.rapla.net/

== Bluetooth ==

For Bluetooth stick, Artila provides drivers for Broadcom Blutonium (BCM2033) and Tektronix BPA 100/105 (Digianswer)

== Tools ==

* SDK for download [http://www.acceed.info/product.phtml?matrix-500-16 SDK]
* The ARM Linux Project : [http://www.arm.linux.org.uk/ Linux for all ARM based machines]

== Connectors ==

* [http://www.acceed.com/manuals/artila/Matrix%20500%20Internal%20Connector.pdf Connector layout]
* [http://www.acceed.com/manuals/artila/Matrix%20500%20Quick%20Installation%20Guide.pdf Board layout]

== Options ==

Standard [http://de.wikipedia.org/wiki/Flash-Speicher flash memory] option is with 16MB flash memory. On request 8MB or 32MB and 64MB are available.

== Watchdog ==

Matrix 500 has a watchdog device and it works as a standard watchdog device under Linux. The default setting of the watchdog timer is 5 seconds. Kernel will reset the watchdog timer before it time out. If for some unexpected reason, kernel fails to reset the watchdog timer, Matrix 500 will reset itself and system will reboot again. We do not recommend user to use watchdog timer in his application. To implement a software Watchdog process is a better way for application level watchdog

== Application Stories ==

Matrix-500 is a standalone embedded computer. Typical applications are in data collection and preparation in POS ([http://de.wikipedia.org/wiki/POS-Terminal Point Of Sale]), at a gas station to prepare and transmit accounting data or in advertisement systems with displays.

== Tech Spec ==

* 2*USB, 3*RS232, 1*RS232/422/485, 1*10/100 Ethernet
* Matrix 500 has a MMU. It is a MMU ready Linux Kernel and fork() is ok. It is not necessary to specify stack size at compile time.
* Matrix 500 uses Standard Linux with MMU Kernel version 2.6.14
* Root Filesystem uses ETX2 format. The Root Filesystem is extract and built on the RAMDISK of Matrix 500 during system startup. The system image uses about 4MB space of the Flash Memory
* User Flash disk uses JFFS2 format and space size is Flash memory size minus 4MB of image(e.g. 16MB Flash - 4MB Image = 12 MB [11764KB ] user flash disk )
* USB WLAN Adaptor Support List (RT2570): [http://rt2x00.serialmonkey.com/wiki/index.php?title=Hardware RT2570 Hardware]
* Boot from USB Disk and SD Card are not available at this moment. We will consider it in the future.

== Firmware Upgrade ==
In case you want to upgrade firmware: use an USB disk and load all files to be upgraded on it. Then
# copy the files "matrix500v2.alf", "m500kv2" and "m500rv2" to a USB flash disk
# Insert the USB disk to Matrix 500
# mount USB disk by " mount /mnt/sda1"
# change to the /mnt/sda1 directory
# type "update m500kv2"
# type "update m500rv2"
# type "update matrix500v2.alf"
# Reboot the Matrix 500

== Source ==

The new link is [ftp://ftp:ftp@ftp.artila.com/Matrix5xx ftp.artila.com/Matrix5xx] (login: ftp, password: ftp).

Python is available on request.

== Flash Recovery ==

1) Recovery from wrong boot image

Please use serial console and under loader screen ( type @@@@ right after reboot to enter loader screen), select format option (H) to format the user disk. After format, reset the system. Doing this will reload the factory setting at next system boot. But it will take about two minute for system to rebuild its /etc/rc.

2) Recovery from corrupt flash

After download newest firmware please perform following steps:

Find the flash corrupted Matrix 500
# Open metal case of Matrix 500
# Find JP1 near COM4 port connector
# Place JP1 to 1-2 position
# Connect the console cable on Port 3 of Matrix 500
# Open hyper terminal software and serial port setting as 115200, n,8,1
# Power on Matrix 500 again (or push reset button)
# You will see "CCCCC" pop up on the hyper terminal from console port
# upload file "loader.bin" with Xmodem protocol
# once done, "CCC" will show up again then
# upload "m500v2.bin" with xmodem
# once complete, loader screen will show up. Type "L" key to upload "matrix500v2.alf " with Kermit protocol
# once done, type "S" to upload "m500kv2" with Kermit
# once done, type "T" to upload "m500rv2" with Kermit

After all these steps are done, place the JP1 to 2-3 position and then reset Matrix 500. The new loader and kernel will boot up and you can perform the test again.

== Why to choose ARM9 with MMU ==

MMU (Memory Management Unit) is important unit for CPU which is operated on multi-task Operating System and software. If the CPU does not have MMU, it have to use uCLinux which is a special version Embedded Linux OS which is designed for non-MMU CPU. Special care must be taken into consideration if you want to port x86 Linux software to a non-MMU RISC-based Linux plaftform. To avoid this compatibility issue, it is better to choose ARM9 RISC with MMU

[[Category:Produkt]]

IP101

2007-11-01T18:31:34Z

Werner:

== IP101 / IP102 / IP104 ==
IP101 series is an easy to use Serial over Ethernet module. There is one port 100/10 Ethernet port and one port DIP switch selectable to RS232, RS422 or RS485. IP101 has one serial port, IP102 2 ports and IP104 has 4 ports

== IP Module In Serial Tunnel ==
* In paired mode (or tunnel mode) you will need 2 IP101
* Choose either TCP (safer, recommended) or UDP (faster) mode
* One module needs to work as "client" and the other as "server"
* For make safe pairing we need to use fixed IP addresses

== RoHS conformity changes ==
The hardware for old IP101 and new IP101 is same architecture. But there are some modification in part to meet RoHS. The major different is in power adaptor. So it is no difference in firmware.

== Firmware ==
Please keep in mind that ver1.5 and ver1.8 firmware is fully different.
If customer could use ver1.5 firmware, then we don't suggest to upgrade.
The upgrade procedure is very complex. Please read the PDF file in
attached file carefully. There are two steps to upgrade the firmware.
* step 1===> to upgrade ver1.5 to middle version firmware.
* step 2===> to upgrade middle version to ver1.8

Please use one clean environment (just one PC and one IP101 in LAN connection) to do
upgrade procedure.

[[Category:Produkt|Ip101]]

IP-Schutzklassen EN 60529

2007-11-01T18:30:36Z

Werner:

'''IP-Schutzklassen (EN 60529):'''

Eindringschutz gegen feste Fremdkörper:
* Klasse 0: kein Schutz
* Klasse 1: gegen Körper > 50,0 mm Durchmesser
* Klasse 2: gegen Körper > 12,5 mm Durchmesser
* Klasse 3: gegen Körper > 2,5 mm Durchmesser
* Klasse 4: gegen Körper > 1,0 mm Durchmesser
* Klasse 5: staubgeschützt
* Klasse 6: staubdicht

Wasserschutz gegen:
* Klasse 0: kein Schutz
* Klasse 1: Tropfwasser
* Klasse 2: Tropfwasser bei 15° Gehäuseneigung
* Klasse 3: Sprühwasser
* Klasse 4: Spritzwasser
* Klasse 5: Wasserstrahl
* Klasse 6: starker Wasserstrahl
* Klasse 7: zeitweiliges Untertauchen
* Klasse 8: permanentes Untertauchen

Beispiel:
* IP54 heißt staubgeschützt und spritzwasserfest
* IP67 heißt staubdicht und wasserdicht gegen zeitweiliges Untertauchen

Main Page

2007-11-01T16:57:07Z

Werner:

Welcome to the estimated reader,

this is a wiki of acceed GmbH.
acceed sells a lot of high tech products. To support customers before and after sales we installed these pages.

This wiki is intended to grow to a knowledge data base about our products. We will put our knowledge and experience about our products into this wiki. Our customers are invited to share either their experiences, their "secret" hints with others and sometimes their warnings. In fact we are engaged to let manufacturers of the specific products take part in this pages.

Of course this wiki is paid by our commercial intention. Anyhow, we will take care of this basic:
: a) just products sold by acceed
: b) a neutral way of presenting facts

Please enjoy the start and give us some feedback!

acceed GmbH

<big>'''MediaWiki has been successfully installed.'''</big>

Consult the [http://meta.wikipedia.org/wiki/MediaWiki_User%27s_Guide User's Guide] for information on using the wiki software.

== Getting started ==

* [http://www.mediawiki.org/wiki/Help:Configuration_settings Configuration settings list]
* [http://www.mediawiki.org/wiki/Help:FAQ MediaWiki FAQ]
* [http://mail.wikipedia.org/mailman/listinfo/mediawiki-announce MediaWiki release mailing list]